A Green Integrated Inventory Model for a Three-Tier Supply Chain of an Agricultural Product
DOI:
https://doi.org/10.18034/ei.v8i2.505Keywords:
Agricultural product, Green supply chain, Integrated inventory, Lot size, Supply chain, ByproductAbstract
Green supply chain management coordinates environment issues into the supply chain business. It has been popular to both academicians and practitioners. Smooth supply of processed agricultural products is essential for human beings and pets. In some models, excess raw materials, byproducts and defected products are kept neglected in producing and marketing finished products. Here, we have presented a three-tier green supply chain model for an agricultural product where byproducts are used for some purposes. Solution procedure of the model is derived. We have demonstrated the model using two numerical example problems.
Downloads
References
Abdelsalam, H.M., Elassal, M.M. (2014), Joint economic lot sizing problem for a three-layer supply chain with stochastic demand, Int. J. Prod. Econ. 155(1), 272–283. DOI: https://doi.org/10.1016/j.ijpe.2014.01.015
Baboli, A., Fondrevelle, J., Tavakkoli-Moghaddam, R., Mehrabi, A. (2011), A replenishment policy based on joint optimization in a downstream pharmaceutical supply chain: centralized vs. decentralized replenishment, Int. J. Adv. Manuf. Technol. 57(1–4), 367–378. DOI: https://doi.org/10.1007/s00170-011-3290-x
Banerjee, A. (1986), A joint economic-lot-size model for purchaser and vendor, Decis. Sci. 17(3), 292–311.
Ben-Daya, M., and Al-Nassar, A. (2008), An integrated inventory production system in a three-layer supply chain, Production Planning & Control, 19(2), 97–104. DOI: https://doi.org/10.1080/09537280801895930
Ben-Daya, M., As’ad, R., Seliaman, M. (2013), An integrated production inventory model with raw material replenishment considerations in a three-layer supply chain, Int. J. Prod. Econ. 143(1), 53–61. DOI: https://doi.org/10.1016/j.ijpe.2010.10.024
Ben-Daya, M., Darwish, M., Ertogral, K. (2008), The joint economic lot sizing problem: review and extensions, Eur. J. Oper. Res. 185(2), 726–742. DOI: https://doi.org/10.1016/j.ejor.2006.12.026
Ben-Daya, M., Hariga, M. (2004), Integrated single vendor single buyer model with stochastic demand and variable lead time, Int. J. Prod. Econ. 92(1), 75–80. DOI: https://doi.org/10.1016/j.ijpe.2003.09.012
Ca ´rdenas-Barro ´n, L.E. (2007), Optimizing inventory decisions in a multi-stage multi-customer supply chain: a note, Transp. Res. Part E Logist. Transp. Rev. 43(5), 647–654. DOI: https://doi.org/10.1016/j.tre.2005.09.011
Ca´rdenas-Barro´n, L.E., Teng, J.T., Trevin˜o-Garza, G., Wee, H.M., Lou, K.R. (2012), An improved algorithm and solution on an integrated production inventory model in a three-layer supply chain, Int. J. Prod. Econ. 136(2), 384–388. DOI: https://doi.org/10.1016/j.ijpe.2011.12.013
Chen, T.H. and Chen, J.M. (2005), Optimizing supply chain collaboration based on joint replenishment and channel coordination, Transportation Research Part E: Logistics and Transportation Review, 41(4), 261-285. DOI: https://doi.org/10.1016/j.tre.2004.06.003
Chung, S.L., Wee, H.M. and Yang, P.C. (2008), Optimal policy for a closed-loop supply chain inventory system with remanufacturing, Mathematical and Computer Modeling, 48(5), 867-881. DOI: https://doi.org/10.1016/j.mcm.2007.11.014
Gal, P.Y.L., Lyne, P.W.L., Meyer, E., Soler, L.G. (2008), Impact of sugarcane supply scheduling on mill sugar production: a South African case study, Agric. Syst. 96(1–3), 64–74.
Giri, B.C., Bardhan, S. (2015), A vendor-buyer JELS model with stock-dependent demand and consigned inventory under buyer’s space constraint, Oper. Res. Int. Journal 15(1), 79–93.
Glock, C.H. (2012), The joint economic lot size problem: a review, Int. J. Prod. Econ. 135(2), 671–686. DOI: https://doi.org/10.1016/j.ijpe.2011.10.026
Goyal, S.K. (1977), Determination of optimum production quantity for a two-stage production system, Oper. Res. Q. 28, 865–870.
Goyal, S.K., Nebebe, F. (2000), Determination of economic production-shipment policy for a single-vendor single-buyer system, Eur. J. Oper. Res. 121(1), 175–178. DOI: https://doi.org/10.1016/S0377-2217(99)00013-2
Gunasekaran, A., Lai, K., Edwin Cheng, T.C. (2008), Responsive supply chain: a competitive strategy in a networked economy, Omega Int. J. Manag. Sci. 36(4), 549–564. DOI: https://doi.org/10.1016/j.omega.2006.12.002
Hariga, M., Glock, C.H., Kim, T. (2016), Integrated product and container inventory model for a singlevendor single-buyer supply chain with owned and rented returnable transport items, Int. J. Prod. Res. 54(7), 1964–1979. DOI: https://doi.org/10.1080/00207543.2015.1071896
Hellion, B., Mangione, F., Penz, B. (2015), Stability contracts between supplier and retailer: a new lot sizing model, Int. J. Prod. Res. 53(1), 1–12. DOI: https://doi.org/10.1080/00207543.2014.919419
Hill, R.M. (1999), The optimal production and shipment policy for the-single vendor single-buyer integrated production-inventory problem, Int. J. Prod. Res. 37, 2463–2475.
Hoque, M.A. (2011), An optimal solution technique to the single-vendor multi-buyer integrated inventory supply chain by incorporating some realistic factors, Eur. J. Oper. Res. 215(1), 80–88. DOI: https://doi.org/10.1016/j.ejor.2011.05.036
http://digital-library.theiet.org/content/conferences/10.1049/cp.2014.1055
Islam, S.M.S. (2014), Single-vendor single-buyer optimal consignment policy for a seasonal product, HSTU Journal of Science and Technology 12, 59-66.
Islam, S.M.S., Hoque, M.A. (2014a), A vendor-buyer optimal consignment policy for a seasonal product with uniform distribution of demand, Malays. J. Sci. 33(2), 219–227. DOI: https://doi.org/10.22452/mjs.vol33no2.7
Islam, S.M.S., Hoque, M.A. (2014b), An extension to single-manufacturer, multi-retailer consignment policy for retailers’ generalized demand distributions, Brunei International Conference on Engineering and Technology, Brunei, 1-3 November, pp.1-6. DOI: https://doi.org/10.1049/cp.2014.1055
Islam, S.M.S., Hoque, M.A. (2017), A joint economic lot size model for a supplier-manufacturer-retailers supply chain of an agricultural product, Int. J. OPS. 54(4), 868–885.
Islam, S.M.S., Hoque, M.A. (2018), Single-vendor single-buyer optimal consignment policy with generic demand distribution by considering some realistic factors, Int. J. Oper. Res. 31(2), 141-163.
Islam, S.M.S., Hoque, M.A. (2019), An optimal policy for three-tier supply chain for processing an agricultural product with a stochastic demand, Int. J. Services and Operations Management 33(3), 287-310. DOI: https://doi.org/10.1504/IJSOM.2019.10022580
Islam, S.M.S., Hoque, M.A., Hamzah, N. (2017), Single-supplier single-manufacturer multi-retailer consignment policy for retailers’ generalized demand distributions, Int. J. Prod. Econ. 184(1), 157–167. DOI: https://doi.org/10.1016/j.ijpe.2016.11.021
Islam, S.M.S., Yasmin, M.J. and Hossain, R. (2020), A joint economic lot size inventory model for a supply chain problem of multiple agricultural products having same properties, Int. J. of Latest Trends in Engineering and Technology 18(2), 37-42.
Jaber, M.Y. and Goyal, S.K. (2008), Coordinating a three-level supply chain with multiple suppliers, a vendor and multiple buyers, Int. J. Prod. Econ. 116(1), 95-103. DOI: https://doi.org/10.1016/j.ijpe.2008.08.001
Khouja, M. (2003), Optimizing inventory decisions in a multi stage multi-customer supply chain, Transportation Research Part E: Logistics and Transportation Review, 39(3), 193-208. DOI: https://doi.org/10.1016/S1366-5545(02)00036-4
Kim, T., Glock, C.H., Kwon, Y. (2014), A closed-loop supply chain for deteriorating products under stochastic container return times, Omega 43(1), 30–40. DOI: https://doi.org/10.1016/j.omega.2013.06.002
Lee, W. (2005), A joint economic lot size model for raw material ordering, manufacturing setup, and finished goods delivering, Omega Int. J. Manag. Sci. 33(2), 163–174.
Moncayo-Martı ´nez, L.A., Zhang, D.Z. (2013), Optimising safety stock placement and lead time in an assembly supply chain using bi-objective MAX–MIN ant system, Int. J. Prod. Econ. 145(1), 18–28. DOI: https://doi.org/10.1016/j.ijpe.2012.12.024
Munson, C.L. and Rosenblatt, M.J. (2001), Coordinating a three-level supply chain with quantity discounts, IIE Transactions, 33(5), 371-384. DOI: https://doi.org/10.1080/07408170108936836
Sari, D.P., Rusdiansyah, A., Huang, L. (2012), Models of joint economic lot-sizing problem with time-based temporary price discounts, Int. J. Prod. Econ. 139(1), 145–154. DOI: https://doi.org/10.1016/j.ijpe.2011.12.014
Sarmah, S.P., Acharya, D., Goyal, S.K. (2006), Buyer vendor coordination models in supply chain management, Eur. J. Oper. Res. 175(1), 1–15.
Wang, C., Huang, R., Wei, Q. (2015), Integrated pricing and lot-sizing decision in a two-echelon supply chain with a finite production rate, Int. J. Prod. Econ. 161(1), 44–53. DOI: https://doi.org/10.1016/j.ijpe.2014.11.011
--0--
Downloads
Published
Issue
Section
License
Engineering International is an Open Access journal. Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a CC BY-NC 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of their work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. We require authors to inform us of any instances of re-publication.
