IoT for Future Technology Augmentation: A Radical Approach
DOI:
https://doi.org/10.18034/ei.v7i2.601Keywords:
Internet of Things (IoT), IoT architecture, Future Technology, Technology Boosting, IoT ApplicationsAbstract
Known as the Internet of Things (IoT), it is a new paradigm that has transformed a traditional way of life into a high-tech way of life. Smart cities, smart homes, pollution management, energy conservation, smart transportation, and smart industries are all examples of transformations brought about by the Internet of Things. A large number of important research studies and investigations have been carried out in order to improve technology through the Internet of Things. However, there is still a slew of obstacles and issues that must be addressed before the Internet of Things can realize its full potential. These challenges and issues must be evaluated from a variety of perspectives related to the Internet of Things, including applications, challenges, enabling technologies, social and environmental implications, and so on. In this review article, the primary purpose is to present an in-depth discussion from both a technological and a sociological standpoint. The article examines the various obstacles and critical issues associated with the Internet of Things and the architecture and important application domains. Additionally, the essay brings to light the existing literature and illustrates its significance to many parts of the Internet of Things. Furthermore, the significance of big data and its analysis in relation to the Internet of Things has been highlighted. This article will assist readers and researchers in better understanding the Internet of Things (IoT) and how it might be applied in the real world.
Downloads
References
Adusumalli, H. P. (2016a). Digitization in Production: A Timely Opportunity. Engineering International, 4(2), 73-78. https://doi.org/10.18034/ei.v4i2.595
Adusumalli, H. P. (2016b). How Big Data is Driving Digital Transformation?. ABC Journal of Advanced Research, 5(2), 131-138. https://doi.org/10.18034/abcjar.v5i2.616
Adusumalli, H. P. (2017a). Mobile Application Development through Design-based Investigation. International Journal of Reciprocal Symmetry and Physical Sciences, 4, 14–19. Retrieved from https://upright.pub/index.php/ijrsps/article/view/58
Adusumalli, H. P. (2017b). Software Application Development to Backing the Legitimacy of Digital Annals: Use of the Diplomatic Archives. ABC Journal of Advanced Research, 6(2), 121-126. https://doi.org/10.18034/abcjar.v6i2.618
Adusumalli, H. P. (2018). Digitization in Agriculture: A Timely Challenge for Ecological Perspectives. Asia Pacific Journal of Energy and Environment, 5(2), 97-102. https://doi.org/10.18034/apjee.v5i2.619
Adusumalli, H. P., & Pasupuleti, M. B. (2017). Applications and Practices of Big Data for Development. Asian Business Review, 7(3), 111-116. https://doi.org/10.18034/abr.v7i3.597
Ahmed, A. A. A. (2012). Disclosure of Financial Reporting and Firm Structure as a Determinant: A Study on the Listed Companies of DSE. ASA University Review, 6(1), 43-60.
Ahmed, A. A. A. and Neogy, T. K. (2009). Merger & Acquisitions (M&A) Goodwill Accounting: Principles and Practice. The Bangladesh Accountants, 65, 75-91.
Ahmed, A. A. A., and Madan Mohan Dey, M. M. (2009). Corporate Attribute and the Extent of Disclosure: A Study of Banking Companies in Bangladesh. 5th International Management Accounting Conference (IMAC), Univ Kebangsaan Malaysia, Fac Econom & Business, Kuala Lumpur, MALAYSIA, 531-553. https://publons.com/publon/11427801/
Alavi, A. H., Jiao, P., Buttlar, W. G., Lajnef, N. (2018). Internet of things-enabled smart cities: state-of-the-art and future trends. Measurement, 129, 589–606.
Azad, M. R., Khan, W., Ahmed, A. A. A. (2011). HR Practices in Banking Sector on Perceived Employee Performance: A Case of Bangladesh. Eastern University Journal, 3(3), 30–39.
Begum, R., Ahmed, A. A. A., Neogy, T. K. (2012). Management Decisions and Univariate Analysis: Effects on Corporate Governance in Bangladesh. Journal of Business Studies, 3, 87-115.
Cheng, Y., et al. (2014). AirCloud: a cloud based air-quality monitoring system for everyone. In: Proceedings of the 12th ACM conference on embedded network sensor systems, ACM, Memphis, Tennessee, 03–06 Nov, p. 251–65.
Fadziso, T., Adusumalli, H. P., & Pasupuleti, M. B. (2018). Cloud of Things and Interworking IoT Platform: Strategy and Execution Overviews. Asian Journal of Applied Science and Engineering, 7, 85–92. Retrieved from https://upright.pub/index.php/ajase/article/view/63
Fang, S., et al. (2014). An integrated system for regional environmental monitoring and management based on internet of things. IEEE Trans Ind Inf., 10(2), 1596–605.
Heer, T., Garcia-Morchon, O., Hummen, R., Keoh, S. L., Kumar, S. S., Wehrle, K. (2011). Security challenges in the IP based internet of things. Wirel Pers Commun., 61(3), 527–542.
Khajenasiri, I., Estebsari, A., Verhelst, M., Gielen, G. (2017). A review on internet of things for intelligent energy control in buildings for smart city applications. Energy Procedia, 111, 770–779
Kim, N. S., Lee, K., Ryu, J. H. (2015). Study on IoT based wild vegetation community ecological monitoring system. In: Proc. 2015 7th international conference on ubiquitous and future networks, Sapporo, Japan, 7–10 July. IEEE.
Liu J, Xiao Y, Philip-Chen CL. (2012a). Authentication and access control in the internet of things. In: 32nd international conference on distributed computing systems workshops, Macau, China. IEEE xplore. https://doi.org/10.1109/icdcsw.2012.23
Liu, T., Yuan, R., Chang, H. (2012). Research on the internet of things in the automotive industry. In: ICMeCG 2012 international conference on management of e-commerce and e-Government, Beijing, China. 20–21 Oct 2012. p. 230–3.
Pasupuleti, M. B. (2015a). Problems from the Past, Problems from the Future, and Data Science Solutions. ABC Journal of Advanced Research, 4(2), 153-160. https://doi.org/10.18034/abcjar.v4i2.614
Pasupuleti, M. B. (2015b). Stimulating Statistics in the Epoch of Data-Driven Innovations and Data Science. Asian Journal of Applied Science and Engineering, 4, 251–254. Retrieved from https://upright.pub/index.php/ajase/article/view/55
Pasupuleti, M. B. (2016a). Data Scientist Careers: Applied Orientation for the Beginners. Global Disclosure of Economics and Business, 5(2), 125-132. https://doi.org/10.18034/gdeb.v5i2.617
Pasupuleti, M. B. (2016b). The Use of Big Data Analytics in Medical Applications. Malaysian Journal of Medical and Biological Research, 3(2), 111-116. https://doi.org/10.18034/mjmbr.v3i2.615
Pasupuleti, M. B., & Adusumalli, H. P. (2018). Digital Transformation of the High-Technology Manufacturing: An Overview of Main Blockades. American Journal of Trade and Policy, 5(3), 139-142. https://doi.org/10.18034/ajtp.v5i3.599
Qiu, T., Xiao, H., Zhou, P. (2013). Framework and case studies of intelligent monitoring platform in facility agriculture ecosystem. In: Proc. 2013 second international conference on agro-geoinformatics (agro-geoinformatics), Fairfax, VA, USA, 12–16. IEEE.
Talavera, J. M., et al. (2017). Review of IoT applications in agro-industrial and environmental felds. Comput Electron Agric, 142(7), 283–97.
Weber, R. H. (2010). Internet of things-new security and privacy challenges. Comput Law Secur Rev., 26(1), 23–30.
--0--
Downloads
Published
Issue
Section
License
Engineering International is an Open Access journal. Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a CC BY-NC 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of their work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. We require authors to inform us of any instances of re-publication.
