Development of Computer Aided Interaction Diagram for Bi-axially Loaded Column

Authors

  • Md. Alvee Islam Navid UAP
  • Syed Jamal Uddin Ahmed UAP
  • Md. Mahbubul Islam Bangladesh Jute Research Institute

DOI:

https://doi.org/10.18034/ei.v3i1.196

Keywords:

Computer, Interaction Diagram, Bi-axially, Loaded Column

Abstract

A research work was undertaken at The Department of Civil Engineering of University of Asia Pacific (UAP), Dhaka, Bangladesh during April to November 2015. Biaxial bending means the column is carrying bending by one or both axis with axial load and with calculations it is possible to put those unique values into a pattern to make an interaction diagram with balanced failure zone, tension failure zone and finally compression failure zone of a short or slender column. By using programming it is possible to make the calculations in seconds. The method is to make functions and calling them to solve certain specific values to generate the diagram pattern. The outcome was diagram data generating application having the ability to combine programming and “Civil Logic”. This is made for students and Civil Engineers who want to make interaction diagrams for designing a short, square and even slender column with ease.

Downloads

Download data is not yet available.

Author Biographies

Md. Alvee Islam Navid, UAP

Department of Civil Engineering, University of Asia Pacific (UAP), Dhaka-1207, BANGLADESH

Syed Jamal Uddin Ahmed, UAP

Assistant Professor, Department of Civil Engineering, University of Asia Pacific, Dhaka-1207, BANGLADESH

Md. Mahbubul Islam, Bangladesh Jute Research Institute

Chief Scientific Officer, Agronomy Division, Bangladesh Jute Research Institute, Dhaka-1207, BANGLADESH

References

Al-Ansari S., (2005) “MATHCAD: Teaching and Learning Tool for Reinforced Concrete Design”. Website: http://goo.gl/jX1sxl. Last visited on 2015.11.03.

Charlampakis E., Koumousis K., “Ultimate Strength Analysis of Composite Sections under Biaxial Bending and Axial Load”. Website:https://goo.gl.St7Ra. Last visited on 2015.11.03.

Nilson H. N., Darwin D. and Dolan W. (2004) “Design of Concrete Structures, 14th edition”.

Saadatmanesh H., Li W., “Strength and Ductility Of Concrete Columns Externally Reinforced with Fiber Composite Straps “Website:http://goo.gl/2jyZXP. Last visited on 2015.11.03.

Sfakianakis G., “Biaxial Bending with Axial Force of Reinforced, Composite and Repaired Concrete Sections of Arbitrary Shape by Fiber Model and Computer Graphics”. Website: http://goo.gl/Jq78i4. Last visited on 2015.11.03.

Wai F.,”Analysis and Design of Reinforced Columns under Biaxial Loading”. Website: http://goo.gl/kZ4qhS. Last visited on 2015.11.03.

Carpani C. Phd. (2006/7) “Civil Engineering Design: Design of Reinforced Concrete Columns”. Website:http://goo.gl/YnM3AX. Last visited on 2015.11.03.

www.tutorialspoint.com (Last visited on 2015.11.03)

www.thenewboston.com (Last visited on 2015.11.03).

www.webcoachbd.com (Last visited on 2015.11.03).

www.w3school.com (Last visited on 2015.11.03).

--0--

Downloads

Published

2015-06-17

How to Cite

Navid, M. A. I., Ahmed, S. J. U., & Islam, M. M. (2015). Development of Computer Aided Interaction Diagram for Bi-axially Loaded Column. Engineering International, 3(1), 15–34. https://doi.org/10.18034/ei.v3i1.196

Issue

Vol. 3 No. 1 (2015): January - June

Section

Peer Reviewed Articles

License

Engineering International is an Open Access journal. Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a CC BY-NC 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of their work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. We require authors to inform us of any instances of re-publication.